Main Menu
Description
BURS SECOND TWO NUMBERS DEFINES THE CUT AND PURPOSE:
EXAMPLE: 5210.060 = TC Cutter - cut 10
TC Cutter - cut 10
For coarse abrasion on chrome - cobalt alloys,
precious metal alloys, chrome - nickel alloys,
model cast alloys, acrylics.
TC Cutter - cut 20
Suitable for all dental materials. It smoothens
the surface and it enables accurate operation
on any structure.
TC Cutter - cut 24
Ensures an exceptionally fine cutting surface
on all alloys – especially on titanium since the
special cut pattern avoids clogging.
TC Cutter - cut 25
Excellent cutting performance and facilitated
chip removal on tough materials like titanium
and NP alloys, P metals, plaster of Paris, model
castings, veneer resins, prosthetic resins.
TC Cutter - cut 26
Suitable for titanium and titanium alloys.
TC Cutter - cut 27
Preparation of non-precious metal alloys.
Smoothing the surface of the material,
which then allows it to be easily polished
TC Cutter - cut 30
For fine finishing of gold, alloys and all versions
of resins & composites – due to the special
cut also ideally suited for ceramics avoiding
occurrence of crackles.
TC Cutter - cut 31
These special titanium-nitride coated cutters
offer specific cool-cutting properties, e.g. for
clasp preparation in the shoulder area, shortening
of attachments, fine finishing of inlays
incl. ceramic inlays.
TC Cutter - cut 40
Causes a rough and streaky surface and thus
an increased surface retention on the metal
framework for ceramic or resin veneers.
TC Cutter - cut 41
Fine, scale-like cutting pattern, for aesthetically
most demanding veneers.
TC Cutter - cut 50
For efficient reduction of resins incl. tray
materials as well as plaster.
TC Cutter - cut 51
For bulk reduction on dry plaster.
TC Cutter - cut 53
Used for trimming denture base acrylics.
The fine-coarse cut is specially tailored to
trimming in acrylic work, is easy to use, does
not catch and produces smooth material surfaces.
TC Cutter - cut 55
For gross reduction of resins and plaster as
well as resin-based tray materials.
TC Cutter - cut 60
Smooth cutting pattern on all alloys and composites,
reduces rework - especially suitable
on prosthetic appliances for papilla shaping.
TC Cutter - cut 65
For trimming of PEEK & PMMA materials.
The type of blade enables quick material
removal with a sharp cut without heating
the material, does not snag and produces
smooth material surfaces, allowing them to
be easily polished.
TC Cutter - cut 70
For all dental materials – the plain cut enables
a smooth cutting pattern, particularly on
resins, and thus reduces rework.
TC Cutter - cut 75
For trimming of soft acrylics / soft relinings.
TC Cutter - cut 75
For trimming of soft acrylics / soft relinings.
TC Cutter - cut 83 / 85
For bulk abrasion on plaster and acrylics.